Surcoat (ca. 1495)

hmx1495surc

Sewing pattern instruction: Bell-shaped, open, overlong sleeves.

Order address of this pattern (German language shop): HMX1495SURC


General remarks

Printing

True-to-scale printing: Pay attention to the PDF-Viewer adjustment NO FITTING TO PRINTER PAGE SIZE and check the control square on the first pattern page.

You can reduce paper consumption on large sewing patterns, if you print only required pages, e.g. if different skirt length is possible.

Pattern preparation

The pages are numbered (see overview) and fit together at the framing line mark. Easiest is cutting two of the margins (e.g. right and bottom), first gluing rows, then gluing the rows together.

Material and Cutting

The material consumption cannot be reasonable specified because of the many different sizes and the reqirements of the used materials. Please lay the cut out paper pattern parts on the floor like on the material panel and calculate the required material amount.

The sewing pattern are without seam or hem allowances. Please add.

The sewing pattern shows all shape defining parts with specification of the required quantity. You should add reinforcement, lining, facing or decoration according to the requirements of material or your wishes.

Enjoy Sewing!

Sewing requires practise and experience. Always recommendable: Sew a sample of cheap material.

But also beginner will be successful with some patience and a good book showing the basic sewing techniques.

Historic sewing technique

The examples are sewn using actual fabrics and a sewing machine. Of course you can work this authentic pattern in historic sewing techniques, too.


Material and Cutting

The material consumption cannot be reasonable specified because of the many different sizes and the reqirements of the used materials. Please lay the cut out paper pattern parts on the floor like on the material panel and calculate the required material amount.

The sewing pattern are without seam or hem allowances. Please add.

The sewing pattern shows all shape defining parts with specification of the required quantity. You should add reinforcement, lining, facing or decoration according to the requirements of material or your wishes.

Applicable for the Surcoat are mostly heavy Wool materials. Often trimming with Fur.

If needed, sew material panels together for enough width.


Sewing

First whip the borders if the material frays out.

Baste front and back parts plain/plain together.

Try fitting! Optimize correct fit. Pin sleeves .

Finish seams.

Try again. Mark hem positions.

Finish hems.

Add Fur trimming / lining.

Fertig!

 

Copyright 1999-2017 © JS Projekt golden-pattern®, Berlin  | www.golden-pattern.de  | Impressum

anleitung_hmx1495surc.html V01 20170717   [S M L X l p T]

Websites

Facebook

Youtube

PASST! Einf?hrungs-Video

Blog

Blog SELBERSCHNEIDERN