Order address of this pattern (German language shop): PBU1924702
This is a historic original sewing pattern. For enthusiasts of authentic clothing, it was digitized based on the original paper pattern.
All parts of the sewing pattern, the labeling, the descriptions and the images stem from the original source.
Please note that the quality of the fit, the circumference, the validity of the descriptions (in original orthography) and images potentially may not correspond to today's quality standards anymore.
True-to-scale printing: Pay attention to the PDF-Viewer adjustment NO FITTING TO PRINTER PAGE SIZE and check the control square on the first pattern page.
You can reduce paper consumption on large sewing patterns, if you print only required pages, e.g. if different skirt length is possible.
The pages are numbered (see overview) and fit together at the framing line mark. Easiest is cutting two of the margins (e.g. right and bottom), first gluing rows, then gluing the rows together.
The material consumption cannot be reasonable specified because of the many different sizes and the reqirements of the used materials. Please lay the cut out paper pattern parts on the floor like on the material panel and calculate the required material amount.
The sewing pattern are without seam or hem allowances. Please add.
The sewing pattern shows all shape defining parts with specification of the required quantity. You should add reinforcement, lining, facing or decoration according to the requirements of material or your wishes.
Sewing requires practise and experience. Always recommendable: Sew a sample of cheap material.
But also beginner will be successful with some patience and a good book showing the basic sewing techniques.
Cut back panel with the centre fold, and two each of the front panel, the sleeves and the shawl as well as four each of the pocket patches.
Fit darts to the front panels according to the markings and then stitch to back panels at the shoulders and sides.
Line the front edges of the coats with outer fabric over canvas interlining, make button holes according to the pattern and a slit whose edges are trimmed with material.
Fit pockets to sides according to instructions, including upright double flaps.
Line lower edges of the sleeves with a strip of material.
The double-layer shawl collar is decorated with a monogram following the preparatory drawing and fitted to the coat as described in the instructions. The loose end is pulled through the slit.
anleitung_pbu1924702.html V01 20170717 [S M L X l p T]